9.8Ft OBD II Vehicle Emergency Power Supply Cable Memory Saver with12V Alligator Clip-On Cigarette Lighter Power Socket

Instruction:

1. Make sure ignition is off and all lights and anything that draws power is off.

2. Plug into OBD2 Male port of car that is to have battery disconnected making sure it is firmly seated.

3. Shut the doors so any interior light and headlights go off.

4. Attach alligator clips on battery of a different vehicle or spare battery. (Not the one being removed or the one being installed)

5. Verify the red LED is lit on the cable. If it is not, check the polarity.

6. Staying clear of the ECU cable, disconnect the battery terminals being careful the positive does not touch the ground of the car.

7. Install new battery being certain not to open any doors or use the fob why on donor power.

Note:

It's car emergency cable, for replacement of car batteries ONLY; since the cable is specially made with anti-protection on incorrect POLARITY, so that the electric power can ONLY be transmitted from cigarette insert to auto, and can't be used as auto connector.

After-sales Service:

From the Date of Purchase, We Provide 1 Year After-Sales Service for All Products. If the Product is Damaged Due to Transportation or Installation, Please Don't Hesitate to Contact With me and We Will Send you a new Product for Free.